Lasers

Laser Quantum launches the excel CW 532nm laser that is capable of up to 2W whilst maintaining noise at <0.5% RMS. The excel’s compact design means you get all of the excellent specifications with a laser that fits in the palm of your hand.  The new intelligent smd12 power supply allows operation in power or current mode, with power stability of <0.4%.

The excel’s robust design, its low requirements for temperature control and long warranty periods make it ideal for scientific applications and integration into other instruments. Applications include PIV, Ophthalmology and other microscopy.

.

 

 

 

Ventus LP and HP 532nm range will now be presented in a single head from 50mW to 1.5W with improved noise and stability specifications

 

 

 Optics

VGA lenses, with 2.0 mm Total Track Length, based on a 2.5 micron pixel pitch VGA sensor (=1/9" format).

 

 

 

 Detectors

The SHD033 matches the sensitivity of a PMT using solid state amplification of a silicon photodiode.  The proprietary preamp is unique in that is preamplifies the current-chopped junction charge of the cell, providing and 82 dB linear response. Built-in temperature control and leakage shielding minimize noise and dark current. The special silicon cell has a broad spectral range with excellent sensitivity in the near I, recovers rapidly from overload (such as direct sunlight), which would destroy a PMT) while maintaining its calibration integrity over time.

Since the complex preamplification circuitry is located within the actual detector head, noise is held to a minimum. The remote circuitry requires input voltages automatically provided by the ILT1700 Research Radiometer.

Description: 33 mm2 silicon detector with internal high gain amplifier. Measurement range: 1(10-13) to 15(10-6) W. Compatible with ILT1700 only. Spectral range: 200-1050nm, 750nm peak

 

Common configured detector combinations:

 

 

Also from ILT

Multiplexer Research Radiometer.

Allowing data collection of radiometer light measurement.

Up to 8 detectors per unit.

 intl-lighttech.com/products/light…

 

 

 

Philtec has launched a new web site at www.philtec.com

 

on displacement sensors,

Including application notes as displayed at the right

 

Light-Conversion  is the world leading manufacturer of continuously wavelength tunable ultrafast light sources based on TOPAS series of optical parametric amplifiers and frequency mixers. Established in 1994, as a spin-off from Vilnius University Laser Research Center, the company has built its strength on profound knowledge in the field of optical parametric generation and amplification accumulated by its people in general and its leader Dr. Romualdas Danielius in particular. 

Starting from 2007 Light Conversion has introduced it’s new development – PHAROS ultra short laser system. Featuring market-leading femtosecond pulse output parameters along with robust, industrial design PHAROS has gained significant attention of industrial and scientific customers. Primary applications of Light Conversion femtosecond laser are in material processing and micromachining. However coupled with ORPHEUS parametric amplifiers PHAROS becomes an attractive laser source for ultrafast spectroscopy applications.

Light Conversion is a private company with >70 employees. The company is based in Vilnius, the capital of Lithuania. The company’s activities are mainly concentrated on the product development, manufacturing and service.

 

PHAROS products

 

Femtosecond Yb:KGW system "PHAROS" is a versatile ultrashort laser platform offering unprecedented flexibility and reliability for scientific and industrial applications. Single package with a footprint of only 57 cm x 40 cm encloses complete femtosecond ytterbium based amplifier system, harmonic generators and a range of external OPA's "ORPHEUS". Pharos delivers optical pulses with duration <180fs, 10W average power, and variable repetition rate 1kHz..1MHz.

PHAROS

“PHAROS” is a single-unit integrated femtosecond laser system combining millijoule pulse energies and high average power. It features market leading compact size for easy OEM integration and laboratory space saving. Most of “PHAROS” output  parameters can be easily set via control pad or PC tuning the laser for your particular application in seconds. Tunability of laser output parameter allow “PHAROS” system to cover applications normally requiring dif...

READ MORE

CEP stabilization system for PHAROS

Amplification of CEP stable pulses with a reproducible waveform under the pulse envelope is an enabling technology for a variety of strong-field control applications such as generation of isolated attosecond pulses or directional electron emission in above-threshold ionization. Femtosecond diode pumped ytterbium laser amplifiers present an interesting opportunity if this field as compared to Ti:Sapphire because of the average power and repetition rate scalability. Pursuing those applications Lig...

READ MORE

CARBIDE

CARBIDE is a single-unit integrated, ultra compact femtosecond laser system offering high average output power. CARBIDE is built upon technology used in PHAROS high power lasers using chirped pulse amplification technique, employing seed oscillator, regenerative amplifier and pulse stretcher/compressor modules. However compared to predecessor, CARBIDE uses few technological innovations: simplified pump diode setup, compactified laser cavity optimized for efficient output, ...

READ MORE

OPA "ORPHEUS"

ORPHEUS is a collinear optical parametric amplifier of white-light continuum pumped by PHAROS laser. ORPHEUS maintains the best features of TOPAS series amplifiers: high output stability throughout the entire tuning range, high output pulse and beam quality, full computer control via USB port as well as lots of optional frequency mixers to extend the tuning range from UV up to mid-IR ranges. It can also operate at wide range of repetition rates from 1 kHz up to 1 MHz.   ...

READ MORE

ORPHEUS-N

“ORPHEUS-N” is a non-collinear optical parametric amplifier (NOPA) pumped by the “PHAROS” laser system. Depending on the “ORPHEUS-N” model, it has a built in second or third harmonic generator providing 515nm or 343nm as pump for the NOPA.   
  “ORPHEUS-N” with second harmonic pump (“ORPHEUS-N-2H”) delivers pulses of less than 25fs in 650-850nm range with average power of more than 0.5W at 650nm (pumped at 6W @1030nm, 200kHz)....

READ MORE

Industrial harmonic generators

PHAROS laser dedicated for industrial applications are equipped with optional, wavelength converters providing high power harmonics radiation at 515 nm, 343 nm and 258 nm wavelengths.   
  Harmonic generators are designed for the use in industrial applications where single output  wavelength is desired. Modules are mounted directly on the output of the laser organically integrating into the system without need for extra mounting   
  ...

READ MORE

Harmonics generator "HIRO"

“HIRO” is a harmonics generator for “PHAROS” laser providing conversion to 515 nm, 343 nm and 258 nm wavelengths. 
 With it’s small foot print – 155x325mm – and a wide variety of fixing methods “HIRO” fulfills the need of all – OEM, industrial and scientific users. Depending on the model of “HIRO” it can provide the second and the fourth or the second, the third and the fourth harmonic. Th...

READ MORE

SHBC

Pharos harmonic generator product line features second harmonic bandwidth compressor abbreviated as SHBC. Device is dedicated for the formation of narrow bandwidth picosecond pulses from broadband output of ultrafast laser. In Pharos platform SHBC is used to create flexible setups providing fixed wavelength or tunable narrow bandwidth ps pulses in combination with tunable wavelength broadband fs pulses. This feature is used in spectroscopy applications ...

READ MORE


IL Photonics proudly distributes/represents all the lines of Light conversion in Israel, except for the Topas line that is sold through Newport.

 

If not advised otherwise the prices are DDP, Israel and don't include 16% VAT,

      special actions maybe conditioned as long as in stock or till a certain date. Ask for a quote on any product.

       Most likely you have actively subscribed to our news letter (to either IL Photonics or to RM Photonics).

       However it can be that you actively requested other information and we replied with this requested information that we assume that you are interested to receive our Monthly newsletter or very targeted updates,

       and gave you the option to advise us that you do not wish to receive this.

     

To unsubscribe send an e-mail to: moshe@ilphotonics.com

      and write in the subject field "unsubscribe.

 

      IL Photonics BSD Ltd. : Phone: +972-2-9923532; Fax: +972-2-9921480

 

      Site: www.ilphotonics.com;  E-mail: moshe@ilphotonics.com

      511 Hashita, Beit Shemesh 99552, Israel

 

Photonics with Know How

Home | Products | About us | News | Contact

Copyright ILPhotonics